How to Program Your V6+ Remote
Control TV Power & Volume
This guide shows you how to program your V6+ remote to control your TV or AVR (Audio/Video Receiver) power and volume functions.
✅ Tested with Insignia Fire TV
✅ Process is similar for most TV brands
What You’ll Need
- Your V6+ remote
- Your TV remote (or AVR remote for volume control)
- Both remotes powered on and working
Step-by-Step Setup
Step 1: Position the Remotes
- Place both remotes on a flat surface
- Keep them about 1 inch apart
- Align the top ends facing each other
- Make sure the power buttons line up directly
Step 2: Enter Programming Mode
- Press and hold the left vacant power button (white) on the V6+ remote
- Hold until the light turns solid blue (about 2 seconds)
Step 3: Choose the Button to Program
Quickly press the button you want to program:
Power
Volume Up
Volume Down
- These are located in the “TV Control” row at the top
- The blue light will begin flashing
Step 4: Transfer the Signal
Quickly press the matching button on your TV (or AVR) remote
The blue light will:
Flash a few times
Then turn solid blue again
✅ This means the button is successfully programmed.
Programming Volume (Optional)
To program volume control:
Repeat Step 3 and Step 4 for:
- Volume Up
- Volume Down
If your volume is controlled by a separate AVR remote, use that remote instead of your TV remote during signal transfer.
Important Note
⏱ If you wait too long after entering programming mode, the remote will exit and the blue light will turn off.
If this happens, simply repeat the process starting from Step 2.
Exit Programming Mode
After programming all desired buttons:
- Wait about 5 seconds
- The blue light will turn off automatically
- The remote will exit programming mode
Troubleshooting
If programming does not work:
- Reposition the remotes closer together
- Ensure both remotes have working batteries
- Try aligning them more precisely
- Some older TV models may not transmit signals properly
If issues continue, consult your TV or AVR manufacturer’s support resources.